wp55b0dd48.png
wp4ed4d944.png
wp91074f43.jpg
wpa4923fff.jpg
wp0fe7637b.jpg
wp54b53ef2.jpg

Harold Hall

A

wpf103b841.png

Angle plate clamps, compact

wp650cce86.png

Angle plate.

wp12afb719.png

Angle plate, small, from casting

wpc3f23351.png

Angle plate, tilting, from castings.

wp650cce86.png

Adhesive, Work holding on the lathe.

wpbf8f9ade.png

B

wpf103b841.png

B

wp665f228b.png

BA Tapping drill sizes

wpce37b4ea.png

Back cutting, milling mc, effect on finish

wpc49a979e.png

Back stop for a lathe spindle

wp47d90315.png

Back stop for a lathe spindle. Using

wp74404c99.png

Barrel shaped Con rod, machining

wpe4c4036c.png

Bender, hot wire, plastic sheet. Use for

wp74404c99.png

Bender, hot wire, plastic sheet

wpc3f23351.png

Between centres test bar

wpc49a979e.png

Book, Dividing

wpce37b4ea.png

Book, Lathework, a Complete Course

wp29f35ae0.png

Book, Metal Workers Data Book

wpce37b4ea.png

Book, Milling, a Complete Course.

wpce37b4ea.png

Book, Model Engrs’ Workshop Projects.

wp29f35ae0.png

Book, The Metalworker’s Workshop

wpce37b4ea.png

Book, The Milling Machine.

wp29f35ae0.png

Book, Tool and Cutter Sharpening

wpce37b4ea.png

Boring Head, small

wp650cce86.png

Boring a cross slide mounted component.

wp12afb719.png

Boring small holes on the lathe.

wpe4c4036c.png

The wording in the button indicates the items purpose.

 

For a project (something to make) labelled  “Proj M” or “Proj S”. In the case of a process (typically, how to sharpen an end mill), it is “Proc M” or “Proc S”

 

The letters M and S indicate it is the main (M) content of the pages or an embedded subject (S) within them.

 

In addition, buttons labelled “Misc” are used for such items as. my books, data pages and some of my personal pages, such as “My Workshop”

Boring tools from round HSS blanks

wp650cce86.png

Boring tools, shaping and sharpening.

wpbf8f9ade.png

Boring tool types.

wpbf8f9ade.png

C

wp665f228b.png

C

wpf103b841.png

Cast Iron, machining

wp74404c99.png

Castings, machining sequence.

wpe4c4036c.png

Centre finder, needle point

wpbf8f9ade.png

Centre finder, for use on the lathe.

wp650cce86.png

Centre finder. Using on the lathe.

wpbf8f9ade.png

Changewheel quadrant, Myf with gear box  

wp650cce86.png

Changewheel, every combination listed

wpce37b4ea.png

listed for 15 gears. Data  

wp665f228b.png

Changewheel combinations, complete list

wpce37b4ea.png

for 15 gears with an imperial leadscrew.  

wpf103b841.png

Changewheel combinations, complete list

wp29f35ae0.png

for 15 gears with a metric leadscrew.  

wpf103b841.png

Chaser holder,  screw cutting on the lathe

wp650cce86.png

Index of the metalworking pages on this website.     Harold Hall

Metalworking pages index

The details given here show  the metalworking content of my web site, not only listing the  main subject, but also, items of interest on a different subject embedded within them.

 

In the case of embedded subjects this results in the viewer being linked to a page inside the group of pages where the main subject commences. In some cases though, it may be beneficial to read earlier pages within the group to achieve a greater understanding of the embedded  item.

 

To open an article, click on the button to the left of its listing. Each article opens in a new tab enabling more than one of interest to be open at the same time

Balancing fixture, faceplate.

wpc3f23351.png

Angle plate, from casting.

wpc3f23351.png
wpe91bd202.png
wpe286afd7.png
wp954b9af9.png
wp372446d4.png
wpe91bd202.png
wpc5a0ea39.png
wpe286afd7.png
only search This web site

Books, introduction

wpce37b4ea.png

Angle plate, Setup gallery

wp29f35ae0.png

Cross Drilling Setups.

wpce37b4ea.png

Centre Punch, Guided

wp12afb719.png

Videos.  Latest additions

 

     Projects for an afternoon.

I have now added 6 videos under the above heading.  These are small items that can, mostly, be made in an afternoon.

 

For a complete list of my videos, including the latest, see the       index here